Underwater junction box FA-H2 by Focus in cast brass designed to make wiring your underwater lights much easier. Taking from a single power source, one input can become up to 8 outputs. This junction box is customizable in configuration of inputs, outputs and input wire lead length. This underwater junction box comes with a surface mount bracket attached. Internal connector(s) are teal high temperature, thermal plastic housing with stainless steel barrel lugs and 3M dielectric sealing tape with a 200w maximum load. Fittings are brass, nickel plated PG9 Liquid Tight (not fitted on default J-Box). Please be aware that when using underwater fixtures, you must avoid using strong acid chemicals in that body of water as it will destroy the fixtures. For more detailed information, please click here.
- UL Listed 676
- IP68 Rated
- Cast Brass Construction
- Brass Nickel Plated PG9 Liquid Tight Fittings
- Teal High Temperature Thermal Plastic Housing w/ Stainless Steel Barrel Lug Internal Connectors
|Gasket||Black Silicone, 50 Durometer|
|Fitting||Brass, Nickel Plated PG9 Liquid Tight|
|Mounting||Surface Mount Bracket|
Due to multiple configurations with outputs and multiple underwater fixtures, we have left a space for you to specify how you wish the underwater junction box to be set up. Input can be placed on any side or can be placed through the bottom. With any output # options other than 8, there are multiple options on where the outputs can be located. For example, with 5 outputs, I can have 2 on side A, 1 on side B, and 2 on side C and input on the bottom. Another configuration example would be 1 on side D, 2 on side C, 1 on side B, 1 on side A, input on A. When ordering, please use the photo diagram when specifying fitting layout for both input and output. Sides are labeled as A, B, C or D.