Need help from our experts? 800-865-7221
Today, Free shipping on orders over $150*
Product View in Red

120V LED RLM Metal Farmhouse Gooseneck Country Lights - ADLXSV925-G24 - Title 24 Compliant

10.00 LBS
$31.00 OFF
No reviews yet

AQLIGHTING's flagship led barn light, now Title 24 compliant, the ADLXSV925-G24 takes everything you loved about our RLM light fixtures and takes it the next level. This new gooseneck barn light comes with our brand new LED puck light engine module, which is capable of creating up to 1000 lumens in a wide flood beam pattern while only using 10w of energy. The offset threaded head piece is capable of adjusting to almost any angle you desire and once tightened down, will not shift, even in windy conditions. With the included mounting canopy, the ADLXSV925-G24 can be attached to just about any surface and has 2 threaded knockouts for adding optional motion sensors or photocells for automatic operation. The vintage barn light arm is 1" in diameter, strong enough to keep the angle shade and your LED module suspended for years and years, through the wind, sun and the rain. Included with each light fixture is 5 shade screws, 3 wire nuts, 1 shade washer and 1 shade gasket, everything you need to assemble the light and connect it to line voltage. The ADLXSV925-G24 is available in your choice of the following powdercoats: black, white, bronze, red or granite silver but we also provide custom color options upon request (1-800-865-7221).

LEDAQV LED Puck Light Engine Module

Powerful Barn Style Light Fixture

Included with our Title 24 compliant industrial barn light is our brand new LED puck light engine (unless specified otherwise), which generates an enormous amount of light output. The LEDAQV-G24 uses a GU24 type socket which twists and locks into place, securing it into the fixture and remains tightly recessed in the RLM shade.

ADLXSV Solid Cast Threaded Head Piece

Adjustable LED Barn Light

For AQLIGHTING's series of exterior gooseneck vintage barn lights, we used a jagged offset tooth design for the head piece to allow you to change the angle of the shade to any desired position. Once the screw is tighten, the shade will lock in position against the wind and weather but you can re-adjust at any time with the tool-free adjustment screw.

ADLXSV Solid Cast Canopy in Black

Insurmountable Mounting

Included with the ADLXSV925-G24 is our RLM wall mounting canopy, which features 2 1/2" threaded knockouts which can accomodate photocells, motion sensors or other lighting accessories. The mounting canopy can also be used to house the wiring and connections and comes with a rubber gasket to seal it from the outdoor elements.

Need a Photocell or Motion Detector?

Our Gooseneck Lights come with two 1/2" threaded knockouts in the cast wall canopy which allows you to mount a photocell or a motion detector (Call to Order) to the fixture enabling a retro look with modern features on your antique black gooseneck light.


In order to meet Title 24 standards, the ADLXSV925-G24 uses GU24 LED Puck Light engines for maximum energy savings.

Free Items Included!

These items come free with our Gooseneck Lights:

  • 5 x Shade Screws
  • 3 x Wire Nuts
  • 1 x Shade Gasket
  • 1 x Shade Washer
Voltage 120V - 277V
Socket Type GU24
Bulb Type LED Puck Module
Power Draw 10w
Light Output 1000 Lumens
Color Temp Warm White 2700K
Dimming Capacity N/A
Mounting Wall / Surface
Certifications cULus Listed (lampholder)
cULus Listed (module) - Wet Location
Title 24 Compliant
Specification Sheet Download
Installation Instructions Download
Coming Soon!

Frequently Asked Questions

Metal Gooseneck Barn Light - ADLXSV925

Where is the light manufactured?

Per the US governments definition - the US. Many of the parts come from all over the world and are assembled here in the US

So the description says solid cast canopy, swivel, and head piece, but what material are they cast from? What are the shade and socket cover made of?

Solid cast aluminum - swivel, canopy and head piece. Shade is spun aluminum, socket is cast aluminum.

How do you add photocell to make dawn to dusk?

There is a knock out on the canopy. We offer two types 1) commercial and 1) mini Purchase the photocell install where the knock out is and hook it up to your power source. Very easy. As an added bonus we have licensed electricians that can walk you through the process. They are available at 800-865-7221 M-TH 6:30am-7pmPST F 7am-1pm

what are the dimensions? does this light come with a dusk to dawn sensor box or is that available?

As far as the dimensions are concerned, if you click into the section marked as "product details" in the product description, you can see that Product Dimensions sre 30 x 15.2 x 19 inches Not sure about the sensor question. In the description there is mention of a two 1/2"" threaded knockouts for photocell or motion detector".

is this solar powered?

"We have LED or incandescent but not solar. AQ Lighting Customer Care Team 800-865-7221"

Could the neck be shortened. 30" is quite big or do you have a fixture with shorter necK?

30" is the overall length for that fixture. It's a difficult task to cut the arm and have it re-threaded, a $75 up charge but if you have a quantity of 25 we would send it over to the quotes department.

What brand motion detector will work with this light?

Any brand that has a 1/2" NPT

Is the black finish a glossy or matte finish?

The one I have is not black, it's more a "oil rubbed" bronze and it has a satin finish

What is the best type of LED bulb to use with this for outdoor use on a barn?

We recommend the 120v ( line voltage) it only uses 9w of power. This LED GU24 ( safe socket) bulb has the ability to dim and its rated for outdoors. The color of white is warm.

Is this hardwired?

Yes. Inside the shade is a standard light bulb socket with a black, white and ground wire going through the neck. Very simple to install.

What are the actual physical dimensions of the light fixture itself.

Height: 20" x Length: 27.5" x Diameter: 15.5"

Can the arm be cut, so this fixture doesn't stick out so far from the wall?

It could if you were able to take it to a machine shop to re-thread it otherwise you would not be able to attach the canopy. That being said we can custom make the arm to the length you'd like. The other option we have a similar product that has a shorter arm length, its a bit more expensive but its a beautiful fixture. You'd have to go on our site enter the sku TROY-RS - and they offer many arm lengths. It would be best to call Monday - they open 6:30am PST -7PM PST, You will get the best information . Also NEW FREE SERVICE: AQ Lighting offers a free service which allows you to speak with a Licensed Electrician, who could direct you to the proper fixture for your specific application. Call 800-865-7221 ask for the Tech. Dept. They are all licensed professionals and AQ Lighting offers this NEW service absolutely free!

What material is the shade made from - aluminum, steel, something else? Also, what is the finish - paint, powder coat? Where is it manufactured?

The shade is constructed from spun aluminum and the finish is powder coated. All AQLighting brand products are assembled in the US.

Is the black finish matte or glossy?

The standard coating for this fixture is matte. We also offer glossy finish for an added up charge.

Is this fixture UL listed?

This is an ETL listed product. Like the UL Mark, the ETL Listed Mark shows that your product has been independently tested by a Nationally Recognized Testing Laboratory (NRTL). That it has met the minimum requirements of widely accepted product safety standards. And that you have agreed to periodic follow-up inspections to verify continued compliance. And like the UL Mark, the ETL Listed Mark is recognized and readily accepted by manufacturers, retailers, distributors and authorities having jurisdiction (AHJs).

Any experience using a motion detector with the light?

Motion sensors work great and there is a knock out in the canopy for a clean installation

What is the mounting plate diameter?

The mounting plate diameter is 5 inches.

How do I get free shipping?

Any order above $199 automatically qualifies for free shipping

What type of bulb is used for this? and can this be hardwired?

Any light bulb with medium base socket will work. This fixture will work with LED or incandescent bulbs.

Is the light dimmable?

Yes, this fixture is designed to work with a dimmer.

Can this be used indoors?

This fixture is outdoor rated but can also be used indoors.

Is this Fixture Wind Resistant?

When installing gooseneck lighting in your home, office, or commercial building, it is important to keep in mind that wind resistance is crucial to the safety of your property and in turn, your wallet. Poorly designed outdoor gooseneck lights cannot withstand severe weather and wind gusts, resulting in potential damage to not only the fixture itself, but also to the surface it is mounted to.

For more info, please view our wind resistance guide:

0 Reviews

Write a Review