| Marine Grade 316 Stainless Steel | Commercial Construction | ETL Approved | Pre-Wired w/ 252" of 16/3 Underwater Cable | LED Ready |
Marine Grade 316 Construction: What separates this in ground well light from the rest is the material it's made out of 316 rated stainless steel is more highly resistant to corrosion by sea water, brine solutions and other similar environmental factors, making it ideal for seaside or pier based installations. Another benefit is that it is more resilient against chemical based exposures like weak acids. While grade 316 stainless steel does not make this underwater fountain light fixture impervious to any and all damage, it is certainly leaps and bounds higher than similar materials like aluminum.
| Material | Marine Grade 316 Stainless Steel |
| Voltage | 12V |
| Socket Type | N/A - Terminal Leads + Adjustable Bracket Holder |
| Bulb Type | PAR36 |
| Power Rating | 50w Max |
| Wiring | 252" of UL Listed 16/3 Underwater Cable |
| Mounting | Surface |
| Dimensions | 6" X 6.5" X 6.5" |
| Certifications | ETL Approved for Underwater Applications |
INSTALLATION PREPARATIONS AND PRECAUTIONS:
Please read this instruction sheet carefully.
Luminaires must be installed in accordance with the National Electric Code (NEC) and local codes. Failure to do so may result in serious injury and/or damage to the luminaire.
SAFETY WARNING: Luminaire can become very hot, depending on lamp wattage used. Lens and metal around the lamp can become hot enough to blister/burn hands. Particular care should be taken not to place luminaires where small children can reach them, especially when high wattage lamps are used.
IMPORTANT SAFETY INSTRUCTIONS
THE LIGHTED LAMP IS HOT!!!
To avoid electrical shock, turn off the power at the circuit breaker before starting your installation project.
WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:
Please read this instruction sheet carefully.
Luminaires must be installed in accordance with the National Electric Code (NEC) and local codes. Failure to do so may result in serious injury and/or damage to the luminaire.
SAFETY WARNING: Luminaire can become very hot, depending on lamp wattage used. Lens and metal around the lamp can become hot enough to blister/burn hands. Particular care should be taken not to place luminaires where small children can reach them, especially when high wattage lamps are used.
IMPORTANT SAFETY INSTRUCTIONS
THE LIGHTED LAMP IS HOT!!!
To avoid electrical shock, turn off the power at the circuit breaker before starting your installation project.
WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:
- Turn off/unplug and allow fixture to cool before replacing lamp.
- Lamps get hot quickly! Contact only switch/plug when turned on.
- Do not touch hot lens, guard or enclosure
- Keep lamp away from material that may burn
- Do not touch the lamp directly at any time. Use a soft cloth. Oil from the skin may damage the lamp when illuminated.
- Do not operate luminaire fitting with a missing or damaged cover.
%%Panel.OutdoorAccessories%%