Need help from our experts? 800-865-7221
Today, Free shipping on orders over $150*
Product View

12V LED Cast Brass Heavy Duty Underwater Pond Lighting Flood Light - LEDUX003

6.00 LBS
$23.00 OFF
No reviews yet

LED Low Voltage (12v) Heavy Duty Brass Underwater Pond Lighting - LEDUX003. Includes: FREE LED Bulb , 29 ½ foot long heavy duty cable, Rubber "Nautical" Water Seal Gasket. The AQLIGHTING raw brass landscape low voltage (12v) wide spot is designed with an open face to allow for full light distribution. Heavy cast brass construction to ultimate for outdoor use. Brass is the strongest longest lasting material to withstand the exterior elements . It's professional look enhances any residential or commercial areas, a perfect way to highlight plant life and architectural elements. Select the proper beam angle in our AQL energy efficient LED PAR 36 bulb to achieve the best illumination. Also available in LED PAR36 warm white or cool white. LED technology offers a large energy savings, using a fraction of the power that halogen does, and boosts the quality of your lighting. Applicable in either wet or dry locations, and with multiple mounting options. This bulb will still operate even if submerged underwater. This bulb also comes in many beam spreads allowing you to have a larger variety of light output and direction options for your garden, pond or park applications.

12V Cast Brass Underwater Flood Light LEDUX003 Construction

Solid Cast Brass Construction

Crafted from high quality solid cast brass, the LEDUX003 LED brass underwater fountain light is designed to last in the rough environment of the great outdoors. Cast brass is one of the strongest metals used today in the construction of outdoor, underwater lighting. Please be aware that when using underwater fixtures, you must avoid using strong acid chemicals in that body of water as it will destroy the fixtures. For more detailed information, please click here.

12V Cast Brass Underwater Flood Light LEDUX003 Bulb Compartment

WireGuard™ Bushing

Featuring a WireGuard™ bushing, the LEDUX003 LED underwater light has an additional level of protection to help prevent any accidental sheering of your wiring. This helps to extend the already long life of this LED underwater light. A 30' heavy duty SVT cable is included and exits the fixture on the side near the bottom for easy installation. Rest assured knowing that this is an LED pond lighting fixture that will last and AQLIGHTING has your back.


AQLIGHTING is using some of the newest, most efficient and reliable LED's available today for it's LED PAR36 bulbs with over 40,000 hours of life span rating vs less than 2,000 for halogen and a 3,100K color temperature.


We designed the LEDUX003 brass underwater light kits to function on 12V. 12V systems require a low voltage transformer.


  • 1 X 12V LED Cool or Warm 30w Equiv (6W) PAR36 Bulb
  • 1 X LEDUX003 Fixture
  • 1 X 29.5' Heavy Duty Cord
  • 1 X 3.5" Round Case Brass Surface Mounting Base


One year limited warranty against defects in construction.

  • Solid Cast Brass Construction for the Longest Lasting and Highest Quality Fixture
  • Brass "U" bracket allows you to direct fixture to your desired angle.
  • Lifetime Guarantee not to Rust or Corrode
  • WireGuard™ Bushing helps Protect Wires.
  • "Wet Seal" Silicon Gasket.
  • 29' 4" UL Listed SVT Cord.
Material Cast Brass
Voltage 12V
Socket Type N/A Terminal Leads
Bulb Type PAR36
Power Rating 75w Max
Mounting Ground or Surface
Fixture Weight 5.10 lbs.

Product Dimensions:

Please read this instruction sheet carefully.
Luminaires must be installed in accordance with the National Electric Code (NEC) and local codes. Failure to do so may result in serious injury and/or damage to the luminaire.

SAFETY WARNING: Luminaire can become very hot, depending on lamp wattage used. Lens and metal around the lamp can become hot enough to blister/burn hands. Particular care should be taken not to place luminaires where small children can reach them, especially when high wattage lamps are used.

To avoid electrical shock, turn off the power at the circuit breaker before starting your installation project.

  • Turn off/unplug and allow fixture to cool before replacing lamp.
  • Lamps get hot quickly! Contact only switch/plug when turned on.
  • Do not touch hot lens, guard or enclosure
  • Keep lamp away from amterial that may burn
  • Do not touch the lamp directly at any time. Use a soft cloth. Oil from the skin may damage the lamp when illuminated.
  • Do not operate luminaire fitting with a missing or damaged cover.
NOTE: Always use UL recognized wire connectors.

0 Reviews

Write a Review