A 4" 120v Non-IC rated air-tight new work recessed housing. Construction from the highest quality metal available for recessed housings, commercial grade A welded steel. The air-tight feature on this housing serves to reduce energy costs by prevented heated or conditioned air from escaping your house like it normally would with non air-tight housings. A Non-IC rating means that this housing is not meant to be used in houses with insulation. If you have insulation you will need an IC rated can which can be found right here. (NOTE: Housing in link is New Work, you will need access to a ceiling joist for this housing.). This new work can is meant for use in houses where access to a ceiling joist is an option. If you do not have access to a ceiling joist you may consider a remodel can which can be found here.(NOTE: Housing in link is a Remodel Non-IC rated can.) 
Construction and Non-IC Rating:
This 4" 120V air-tight non-IC new work can is made from the highest available grade welded steel, ensuring you get a fixture that will last. A Non-IC rating means that this new work can is not meant to make direct contact with insulation and as such, is not recommended in houses with insulation. If you do have a house with insulation you will need an IC rated housing, which can be found here.(NOTE: Housing in link is New Work, you will need access to a ceiling joist for this housing.) 
Air-Tight and UL Listed:
This 4" 120V Non-IC new work housing is air-tight. As an air-tight housing, the fixture works to reduce energy costs. It does this by preventing heat or conditioned air that would normally escape from non air-tight fixtures, from escaping. On top of that this remodel housing is UL listed for damp locations, as well as for being air-tight. It also is UL listed for its feed through wire system. This means you can install this housing in almost any room in the house. Perfect for bedrooms, kitchens, and bathrooms. 
Safety and Features:
With quality and safety in mind, this 120V Air-Tight new work housing features a built-in aluminum reflective shield to draw heat away from the UL Certified Medium Base socket. A built-in thermal protector will shut the light off in the case of improper bulb installation. Also included are adjustable socket plates that allow you to adjust the placement of the medium base socket to better hide the bulb from view. Bulbs
This housing is designed to use a traditional halogen PAR20 bulb, but is upgradeable to a LED bulb. If you want a LED bulb please click here.
Voltage
We designed our recessed new work housing to function on 120V.
Warranty
One year limited warranty against defects in construction. For details please see our Terms and Conditions page.
Dimensions
Construction and Non-IC Rating: This 4" 120V air-tight non-IC new work can is made from the highest available grade welded steel, ensuring you get a fixture that will last. A Non-IC rating means that this new work can is not meant to make direct contact with insulation and as such, is not recommended in houses with insulation. If you do have a house with insulation you will need an IC rated housing, which can be found here.(NOTE: Housing in link is New Work, you will need access to a ceiling joist for this housing.)
Air-Tight and UL Listed: This 4" 120V Non-IC new work housing is air-tight. As an air-tight housing, the fixture works to reduce energy costs. It does this by preventing heat or conditioned air that would normally escape from non air-tight fixtures, from escaping. On top of that this remodel housing is UL listed for damp locations, as well as for being air-tight. It also is UL listed for its feed through wire system. This means you can install this housing in almost any room in the house. Perfect for bedrooms, kitchens, and bathrooms.
Safety and Features: With quality and safety in mind, this 120V Air-Tight new work housing features a built-in aluminum reflective shield to draw heat away from the UL Certified Medium Base socket. A built-in thermal protector will shut the light off in the case of improper bulb installation. Also included are adjustable socket plates that allow you to adjust the placement of the medium base socket to better hide the bulb from view.
This housing is designed to use a traditional halogen PAR20 bulb, but is upgradeable to a LED bulb. If you want a LED bulb please click here.
Voltage
We designed our recessed new work housing to function on 120V.
Warranty
One year limited warranty against defects in construction. For details please see our Terms and Conditions page.
Dimensions
| Voltage | 120V |
| Socket Type | E26 Medium Base |
| Bulb Type | PAR20 / BR20 Reflector |
| Power Rating | 50w Max |
| Mounting | Ceiling |
| Fixture Weight | 2.25 lbs |
%%Panel.120V4Trim%%
Illuminate every space with confidence and style
The Reliable Partner For All Your Lighting Needs.
+40 Year Experience
With over 40 years of lighting expertise,
we focus in providing the best customer
experience and great quality products
Shipping & Quickship
Free Shipping on items over $100 and
Quickship for selected items placed by
1pm PST ship same day.
Stress Free & Easy Returns
We provide a 30-day, stress free return
and exchange policy on the majority of
our products